Microplastics in Baby Bottles: Glass vs Silicone vs Plastic, and Simple Ways to Cut Them Down
What we know about microplastics from plastic baby bottles, how glass and silicone compare, and easy heating and cleaning habits that lower them safely.
PBy Pramod RimalPublished Updated 11 min read

On this page
- What are microplastics?
- What the research found
- Are microplastics harmful to babies?
- Glass vs silicone vs plastic bottles
- Heating rules: how to lower microplastics at each step
- What about BPA?
- Breastfeeding, expressed milk and microplastics
- Choosing bottles by age
- Cleaning bottles without adding extra wear
- Other places babies meet microplastics
- A simple daily routine
- Cost and convenience
- Common mistakes to avoid
- Buying second-hand bottles and checking recalls
- FAQ
- Sources
Short answer: plastic baby bottles, which are usually made of a plastic called polypropylene, can shed tiny bits of plastic (microplastics) into milk, especially when they get very hot. One well-known study found far more were released when bottles were filled with very hot water and shaken. Food safety agencies say there's no clear proof yet that this harms health, but you can lower the amount with simple steps: don't heat milk in plastic, mix formula in a glass or steel jug where your local method allows, cool feeds before they go into a plastic bottle, and think about glass or silicone bottles. Never skip the safe formula steps your health service gives you.
Key points
- What happens: heat, wear and shaking can make plastic bottles shed tiny particles. Hotter water means more particles.
- What we don't know: agencies like Food Standards Australia New Zealand (FSANZ) and the World Health Organization (WHO) say there isn't enough evidence yet to say these particles harm health.
- Easy changes: boil water in a glass or metal kettle or pot, don't microwave milk in plastic, and let sterilised bottles cool and rinse them with cooled boiled water.
- Bottle choice: glass doesn't shed plastic but can break. Silicone is soft and doesn't break, but it's still a man-made material. Polypropylene is light and cheap.
- Safety first: keep following your country's formula and sterilising rules. Germs are a known, proven risk for babies.
What are microplastics?
Microplastics are very small pieces of plastic, smaller than 5 millimetres. Many are far too small to see. Even smaller ones are called nanoplastics. They come from plastic things breaking down: bottles, packaging, clothes, car tyres and more. They are found in water, air, soil and many foods.
Most baby bottles sold today are made from polypropylene (often shortened to PP, and marked with the number 5 in the recycling triangle). It's light, cheap and doesn't break when dropped. Older bottles were often made from polycarbonate, which contained a chemical called BPA. Those were phased out for baby bottles over a decade ago, as we explain below.
What the research found
In 2020, scientists at Trinity College Dublin published a study in the journal Nature Food. They tested 10 popular polypropylene baby bottles. They followed the usual World Health Organization steps for sterilising bottles and making formula with very hot water.
What they found:
- All the bottles released tiny plastic particles into the liquid.
- The hotter the water, the more particles came off. At room temperature the numbers were much lower.
- Shaking the bottle also released more particles.
- Particles kept coming off over the 3 weeks of testing.
- Other polypropylene kitchen items, like plastic kettles and lunchboxes, released similar amounts.
The researchers estimated that a baby fed with these bottles could swallow very large numbers of particles each day. That number is an estimate from a lab study. It's not a measure of what reaches a baby's blood or body tissues.
Importantly, the same team found that changing a few steps in how you sterilise bottles and make formula could cut the number of particles a lot. Those steps are below.
Are microplastics harmful to babies?
Here's what food safety agencies say:
- Food Standards Australia New Zealand (FSANZ) says very little of the plastic we swallow seems to be absorbed by the gut. It says plastic in food is unlikely to cause immediate harm to health, and that Europe's food safety agency agrees, while more research is needed.
- The World Health Organization looked at microplastics in drinking water in 2019. It said there wasn't enough evidence to show a health risk, and called for more research and less plastic pollution.
So the honest answer is: we don't know for sure. Scientists are still studying it, and some are worried about the very small nanoplastics. Babies are small and drink a lot for their size, which is why many parents want to lower the amount, just to be careful.
What we do know for certain is that germs in formula can make babies very sick. So any change you make to cut microplastics must not make your formula less safe. Every tip in this guide keeps the official hygiene steps in place.
Glass vs silicone vs plastic bottles
| Glass | Silicone | Polypropylene (PP) plastic | Stainless steel | |
|---|---|---|---|---|
| Sheds plastic particles? | No | Silicone is not a plastic in the usual sense, but it is man-made; less studied | Yes, more when hot | No (but often has plastic parts) |
| Weight | Heaviest | Light | Lightest | Light to medium |
| Breaks? | Can break or chip; silicone sleeves help | No | No, but scratches and clouds over time | Can dent |
| Can you see the milk? | Yes | Often slightly cloudy | Yes | No |
| Handles heat? | Yes, but avoid sudden big temperature changes | Yes | Yes, but sheds more when hot | Yes; gets hot to touch |
| Good for | Home use; families wanting no plastic in contact with milk | Families who want light, unbreakable bottles | Travel, day care, budget | Older babies and toddlers; less common for infants |
A few things to remember:
- Teats are usually silicone on all types of bottle. Lids, rings and valves are often plastic. So no bottle is fully plastic-free, but less of the milk touches plastic with glass or steel.
- Glass breaks. A dropped glass bottle can cut you or your baby. Use a silicone sleeve, never let your baby hold a glass bottle unsupervised, and check for chips before each use.
- Older, scratched plastic bottles may shed more. Replace bottles that are cloudy, cracked or scratched.
Heating rules: how to lower microplastics at each step
Heat is the biggest factor. These steps follow the ideas from the Trinity College study, while keeping to safe formula advice.
1. Boil water in glass, steel or a pot
Plastic kettles are polypropylene too. If you can, boil water for formula in a stainless steel or glass kettle, or a pot on the stove.
2. Sterilise, then rinse with cooled boiled water
Sterilising bottles with steam or boiling water is important for the first months. After sterilising, the study team suggested letting bottles cool and then rinsing them three times with cooled sterile (boiled) water. This washes away particles that came off during sterilising. Use only boiled and cooled water for this rinse, so you don't add germs back.
3. Make formula the way your country says
- Australia: Pregnancy, Birth and Baby says to boil water and let it cool to lukewarm before mixing. Cooler water means fewer particles from a plastic bottle.
- UK: the NHS says to mix powder with water that is still at least 70°C, to kill any germs in the powder. If you want to avoid hot water in plastic, you can mix the formula in a glass or stainless steel jug or container that you've sterilised, cool it, then pour it into the bottle.
- US and Canada: follow the CDC and your formula label. Glass or steel containers for mixing work here too.
4. Cool before it goes into plastic
Cool the milk to feeding temperature in a glass or steel container, then pour it into the bottle.
5. Swirl, don't shake hard
Shaking released more particles in the study. Gently swirl to mix, or mix in a jug with a clean spoon.
6. Never microwave milk or formula in plastic
Microwaves heat unevenly and can cause burns. They also heat plastic. Warm bottles by standing them in a bowl of warm water instead.
7. Don't use plastic containers to reheat food
The same idea applies to baby food. Warm it in a glass, ceramic or steel bowl, not plastic.
What about BPA?
BPA (bisphenol A) is a chemical once used in hard, clear polycarbonate baby bottles. Concerns about it led to changes in many countries:
| Country | What happened |
|---|---|
| Australia | In 2010 the Australian Government announced a voluntary phase-out of BPA in polycarbonate baby bottles. FSANZ says dietary exposure to BPA in Australia is low. |
| United Kingdom | BPA in polycarbonate baby bottles was banned across the EU in 2011, which applied in the UK at the time. |
| United States | The FDA no longer allows BPA in baby bottles and sippy cups. Makers had already stopped using it. |
| Canada | Canada was one of the first countries to ban BPA in polycarbonate baby bottles, in 2010. |
Today, almost all baby bottles are "BPA-free". That's good, but it doesn't mean "microplastic-free". Polypropylene bottles are BPA-free and can still shed tiny particles when hot.
Breastfeeding, expressed milk and microplastics
If you express breast milk, the same tips help: store and warm milk in glass where you can, don't microwave it, and avoid very hot water in plastic bottles. Breast milk doesn't need heating to high temperatures anyway. Warm it gently in a bowl of warm water.
Many breast pump parts and milk bags are plastic. There's not much research on how much they shed at normal temperatures. Since they are used cool or at body temperature, the heat factor is low.
Choosing bottles by age
Newborns
You'll make a lot of feeds and sterilise often. This is when the heat steps matter most. Glass bottles work well at home. A couple of plastic or silicone bottles are handy for outings.
3 to 12 months
Babies start to hold their own bottle. Glass with a silicone sleeve, or silicone bottles, are safer for little hands. Keep checking teats for cracks and tears.
From 12 months
Most health services suggest moving from bottles to an open cup or straw cup around 12 months. Stainless steel or glass cups with silicone parts are options, as are plastic cups used with cool drinks only.
Cleaning bottles without adding extra wear
How you wash bottles also affects how fast plastic wears down. Worn plastic may shed more.
- Use a soft bottle brush. Hard scrubbing pads scratch plastic.
- Wash in warm, not boiling, soapy water. Save the high heat for sterilising.
- Dishwashers: many bottles are dishwasher-safe, but hot cycles and drying heat wear plastic over time. If you use one, put bottles on the top rack and skip extra-hot settings where you can.
- Skip ultrasonic cleaners for plastic bottles. The Trinity College researchers suggested not using them on plastic feeding bottles.
- Rinse well. Soap left behind isn't good for babies either.
- Replace bottles and teats when they look cloudy, scratched, sticky, cracked or stretched.
Other places babies meet microplastics
Bottles are only one source. If you want to lower your baby's overall contact with plastic, these simple swaps can help too. None of them are required by health services. They are just options.
| Item | Simple swap or habit |
|---|---|
| Plastic food containers | Store and reheat baby food in glass or stainless steel. Never microwave food in plastic. |
| Plastic plates and bowls | Bamboo-look plates often contain plastic resin too. Silicone, steel or sturdy ceramic are options for older babies, under supervision. |
| Sippy cups | Use with cool drinks only, or choose steel or glass cups with silicone lids. |
| Teethers and toys | Choose food-grade silicone or natural rubber teethers from trusted brands. Throw away anything cracked or chewed apart, as broken pieces can also be a choking risk. |
| Plastic kettles | Use a steel or glass kettle, or a pot. |
| House dust | Dust can carry tiny fibres from carpets and clothes. Regular vacuuming and wiping floors where babies crawl helps. |
A simple daily routine
Here's what a low-microplastic, still-safe routine can look like on a normal day:
- Boil fresh water in a steel or glass kettle.
- Sterilise bottles as your health service says. Let them cool, then rinse with cooled boiled water.
- Make up the feed using your country's method. If hot water is part of it, mix in a sterilised glass or steel jug.
- Cool the feed in the jug, under cold running water or in a bowl of cold water.
- Pour it into the bottle and check the temperature on your wrist.
- Throw away anything left after the feed.
- Wash the bottle gently with a soft brush.
This adds only a few minutes and a jug to wash. If it feels like too much at 3 am, that's OK. A plain, safely made feed in a plastic bottle is still a good feed.
Cost and convenience
Glass bottles usually cost more than plastic ones, and you'll need sleeves. Silicone bottles are often the most expensive. Polypropylene is the cheapest and lightest. Many families mix and match: glass at home, plastic or silicone for day care and travel. Day care centres may have their own rules about glass, so check first.
Common mistakes to avoid
- Skipping sterilising to avoid heat. Don't. Germs are a known danger for babies. Rinse with cooled boiled water after sterilising instead.
- Using tap water to rinse sterilised bottles. This can put germs back. Use cooled boiled water.
- Microwaving bottles. Risky for burns and heats the plastic.
- Keeping old, scratched bottles. Replace them.
- Letting a baby hold a glass bottle alone. Use a sleeve and stay with them.
- Buying "plastic-free" claims without checking. Lids, rings and valves are often plastic. Check what touches the milk.
- Worrying so much you stop feeding as normal. Microplastics are worth lowering, but feeding your baby well and safely comes first.
Buying second-hand bottles and checking recalls
Second-hand bottles are cheap, but older plastic bottles may be scratched or made from older plastics. If you do buy used, choose glass, check for chips, and replace all teats. Check recall lists before buying any feeding product: Product Safety Australia, the UK Product Safety Database, the US CPSC and Health Canada all list recalls.
FAQ
Should I throw away my plastic baby bottles?
You don't have to. You can lower microplastics a lot by changing how you heat and mix formula. If you want to switch, glass or silicone are options.
Are glass bottles safe?
Yes, if they are in good condition. They can break, so use a silicone sleeve and check for chips. Don't pour boiling water into a cold glass bottle, as sudden temperature changes can crack it.
Is silicone better than plastic?
Silicone handles heat well and doesn't break. There's less research on whether it sheds particles. Choose food-grade silicone from a known brand.
Do microplastics cause illness in babies?
There's no clear proof that they do. FSANZ and the WHO say more research is needed. Lowering exposure is a careful choice, not an emergency.
Can I still use a steam steriliser?
Yes. After sterilising, let bottles cool and rinse them with cooled boiled water. This removes many particles shed during heating.
Is mixing formula in a glass jug safe?
Yes, if the jug and spoon are sterilised and you follow your country's water and temperature rules. Pour into the bottle once mixed and cooled.
Are "BPA-free" bottles microplastic-free?
No. BPA-free means they don't contain that chemical. Polypropylene bottles are BPA-free but can still shed tiny particles when hot.
Do bottle warmers add microplastics?
A warmer heats the bottle, so a plastic bottle in a warmer is heated plastic. Most warmers bring milk to around body temperature, which is much cooler than boiling water. If you use one, a glass bottle avoids the question. Never leave milk warming for a long time, both for germs and for heat.
How often should I replace plastic bottles?
There's no set rule. Check them often and replace them when they look cloudy, scratched or cracked, or when the maker's guide says to. Replace teats more often, as soon as they look worn or torn.
Is ready-to-feed formula better?
Ready-to-feed liquid formula doesn't need hot water to mix, so there's no hot-water step in the bottle. It costs more, but it's handy for travel, night feeds or when safe water isn't available.
Sources
- Li D. et al. (2020) – Microplastic release from the degradation of polypropylene feeding bottles during infant formula preparation, Nature Food
- Food Standards Australia New Zealand – Microplastics in food
- Food Standards Australia New Zealand – Bisphenol A (BPA)
- World Health Organization – Microplastics in drinking-water (2019)
- U.S. FDA – Bisphenol A (BPA): use in food contact application
- NHS – How to make up baby formula
- Pregnancy, Birth and Baby – Feeding your baby with formula
- CDC – Infant formula preparation and storage
- Health Canada – Recalls and safety alerts
Pramod Rimal
Founder & editor
Practical, evidence-led guides for Australian families. We check claims against Australian standards and official health and safety guidance, and link our sources so you can check them too.
Visit Pramod Rimal’s website →About us and how we research →
Related guides
More Parental Tips →
Rinsing Baby Bottles After Sterilising: A Simple Habit to Cut Plastic Shedding, Done Safely
10 Nov 2026 · 11 min read
Preparing Your Toddler for a New Baby: Simple Ways to Help Them Adjust
20 Oct 2026 · 15 min readHow to Organise Baby Gear: Simple Ways to Make Daily Care Easier
16 Oct 2026 · 13 min read













