Teething Mittens and Silicone Beaded Clips: Safety, Materials and Choking Rules
Learn how to use teething mittens and silicone beaded clips safely. Compare BPA-free materials, choking rules, and AU, UK, US and Canada safety advice.
PBy Pramod RimalPublished Updated 14 min read

On this page
- Key points
- What teething mittens and silicone beaded clips are
- Choking, strangulation and entanglement risks
- BPA-free, food-grade silicone and safe materials
- Safety rules in Australia, the UK, the US and Canada
- Teething mittens vs silicone beaded clips vs one-piece teethers
- How to choose and use them by age stage
- Step-by-step safety check and daily cleaning
- Common mistakes parents make
- Safer ways to soothe sore gums
- Frequently asked questions
- Sources
Short answer: Teething mittens and silicone beaded clips can help soothe sore gums. They also carry choking and strangulation risks if they break or are too long. Always check for food-grade, BPA-free and phthalate-free silicone. Tug every bead, knot and strap before each use. Keep clips short, and never use mittens or clips when your baby is sleeping.
Safety bodies in Australia (ACCC and Product Safety Australia), the UK (OPSS and NHS), the US (CPSC and American Academy of Pediatrics) and Canada (Health Canada) all warn about small parts and long cords near babies. Simple daily checks keep your baby much safer.
Key points
- Choking risk: Loose beads, broken clips and torn silicone can block a baby's airway.
- Cord length: A clip cord must be short so it can never wrap around a baby's neck.
- Sleep rule: Take off all teething mittens and clips before naps or bedtime.
- Materials: Pick 100% food-grade silicone that is free from BPA, phthalates and lead.
- Pull check: Tug the clip, cord and silicone parts firmly before every use.
- Bin damaged gear: Throw away any mitten or clip with cracks, bite tears or loose threads.
What teething mittens and silicone beaded clips are
Babies often start teething between four and seven months old. Some start earlier, and some start later. During this stage, babies want to chew on almost everything they can reach.
A teething mitten is a soft fabric glove with a textured silicone tip. It slips over your baby's hand and fastens at the wrist with a hook-and-loop strap. Babies who cannot hold a teether yet can chew on their own hand instead. The mitten also keeps saliva off your baby's skin and stops sharp nails from scratching their face.
A silicone beaded clip is a short strap made of silicone beads threaded onto a cord. One end has a clip that fastens to your baby's shirt. The other end has a loop that holds a dummy (pacifier) or a small teether. The clip stops the dummy or teether from falling onto dirty floors.
Why parents like them, and where the risks start
Both items solve everyday problems for tired parents. Picking a dropped teether off a shop floor ten times a day gets old fast. Helping a three-month-old chew safely without dropping a toy is handy too.
Still, both items sit right next to your baby's mouth, neck and hands. A small flaw in how they are made or used can turn a helpful tool into a hazard. Knowing what to look for makes all the difference.
Choking, strangulation and entanglement risks
Babies explore the world with their mouths. They also have strong jaws once teeth begin to push through. That is why choking and strangulation are the top risks with teething gear.
Risks with silicone beaded clips
A beaded clip has many small parts joined by a cord. If that cord snaps or a knot slips, loose beads can spill straight into your baby's mouth. A single bead is often small enough to block a baby's windpipe.
The clip mechanism itself can also break. Some cheap clips have tiny metal springs, plastic teeth or decorative covers. If a baby chews on the clip instead of the teether, those small pieces can snap off.
Cord length is another major risk. A long cord can loop around a baby's neck and cut off air. Never tie a ribbon, string or second clip onto a dummy clip to make it longer. Never use a teething necklace or lanyard on a baby.
Risks with teething mittens
Teething mittens have fewer loose parts, but they still carry risks. The silicone tip is usually stitched or glued onto the fabric glove. If your baby chews through the stitches, the silicone piece can come loose.
Loose threads inside the glove can wrap tightly around tiny fingers. Parents call this a hair or thread tourniquet. It can cut off blood flow to a finger without making a sound.
The wrist strap is another spot to watch. If the hook-and-loop strap comes undone, the whole mitten can slip off. A wet fabric mitten can also hold a lot of drool. If a baby pulls a soggy mitten over their nose and mouth while lying down, it can make breathing harder.
Never use them for sleep
Health groups across all four countries agree on clear cots. Red Nose in Australia, The Lullaby Trust in the UK, the American Academy of Pediatrics (AAP) in the US and Health Canada all say babies should sleep on their backs in a clear cot.
Do not leave a teething mitten on your baby for naps or overnight sleep. Do not leave a dummy clip attached to your baby's clothes in a cot, bassinet, pram or car seat. If your baby sleeps with a dummy, use the dummy on its own without any clip or strap.
BPA-free, food-grade silicone and safe materials
Babies chew on teething gear for hours each week. Whatever is in that material can end up in their saliva. Checking the material label is just as important as checking the size of the parts.
What BPA-free means
BPA stands for bisphenol A. It is an industrial chemical used to make some hard, clear plastics. Babies and young children are more sensitive to chemical exposure because their bodies are small and still growing.
Food Standards Australia New Zealand (FSANZ) and the U.S. Food and Drug Administration (FDA) explain that BPA levels from approved food-contact items are very low. Even so, most trusted baby brands now make bottles, dummies and teethers without BPA. Look for a clear BPA-free label on the package.
Why phthalates, lead and PVC matter
BPA is not the only chemical to avoid. Soft plastics sometimes use phthalates to make them bendy. The U.S. Consumer Product Safety Commission (CPSC) restricts certain phthalates in toys and childcare items because they can harm child health.
Paint, dyes and metal clasps can also hide lead or cadmium. Choose plain, unpainted materials from known makers. Avoid cheap unbranded items sold online with no maker name or safety details.
Food-grade silicone vs other materials
- 100% food-grade silicone: Soft, stretchy, easy to wash and does not harbour mould easily. It has no smell and no taste.
- Unfinished wood beads: Hard and durable, though wood can swell, crack or grow mould if soaked often. Avoid painted or varnished wood beads unless the maker proves the finish is non-toxic.
- Cotton or bamboo fabric: Soft on hands in teething mittens, but holds drool and needs washing every day.
- Hard plastic clips: Light and rust-free, though brittle plastic can crack if dropped or chewed.
- Metal clips: Strong grip, though cheap metal can rust after washing or have sharp edges.
Simple checks for poor silicone
Good food-grade silicone feels smooth and has no strong smell. If a new silicone clip smells strongly of chemicals, fuel or perfume, do not give it to your baby. If the silicone feels sticky, greasy or powdery, skip it.
Be careful with amber teething necklaces and bracelets too. Paediatric groups in Australia, the UK, the US and Canada advise against them. They pose both choking and strangulation risks, and there is no proof that amber reduces teething pain.
Safety rules in Australia, the UK, the US and Canada
Teething mittens and beaded clips sit in a grey area in many shops. Some are sold as toys. Others are sold as clothing or dummy holders. Because of that, the rules depend on how the product is labelled and where you live.
Here is how official bodies in all four countries handle small parts, toys and baby accessories.
| Country | Main safety bodies | Key standards and rules | What parents should check |
|---|---|---|---|
| Australia | ACCC (Product Safety Australia), FSANZ, Raising Children Network | Toy safety standard AS/NZS ISO 8124 (and AS/NZS 8124) covers small parts for under-threes. Mandatory rules ban unsafe toy parts and harmful chemicals. | Look for AS/NZS ISO 8124 on teethers sold as toys. Check Product Safety Australia recalls before buying second-hand. |
| UK | Office for Product Safety and Standards (OPSS), NHS, RoSPA | Toy safety standard BS EN 71 (and EN 71) sets strict small-parts, pull and chemical limits. UK dummy clip rules limit cord length and require air holes on large parts. | Look for UKCA or CE marks and clear maker details. Avoid long cords or unbranded clips from market stalls. |
| US | CPSC, FDA, American Academy of Pediatrics (AAP) | Toy safety standard ASTM F963 and federal small-parts, lead and phthalate bans protect children under three. | Check for maker contact details, age labels (0+ or 3+ months) and CPSC recall lists. |
| Canada | Health Canada, Canadian Paediatric Society (Caring for Kids) | National toy rules ban small parts that fit in a small-parts cylinder for children under three, plus strict lead and phthalate limits. | Check Bilingual (English and French) safety labels and search Health Canada recalls before use. |
Notice a key gap across all four countries. Many handmade beaded clips are sold on social media or craft markets as "fashion accessories" rather than toys or dummy holders. Doing that lets some sellers skip proper pull testing and small-parts checks. Always buy from brands that test their clips to toy or dummy-holder safety rules and print their company name and address on the pack.
Teething mittens vs silicone beaded clips vs one-piece teethers
Not every baby needs a mitten or a beaded clip. A simple one-piece silicone teether is often safer and easier to clean. Compare the three main choices below before you spend money.
| Feature | Teething mitten | Silicone beaded clip | One-piece silicone teether |
|---|---|---|---|
| Best age | 3 to 6 months, before baby can grip toys well | 3 to 12 months, for holding a dummy while awake | 3 months and up, once baby can hold objects |
| Main benefit | Stays on baby's hand and reduces face scratching | Stops dummies and small teethers hitting the floor | No cords, no knots, no loose beads and no fabric |
| Main risk | Wet fabric, loose threads or weak wrist strap | Broken cord, loose beads or neck entanglement | Very low risk if sized larger than a baby's mouth |
| Cleaning ease | Needs full machine or hand wash and slow air drying | Wipe or wash in soapy water; cord knots dry slowly | Quick wash in warm soapy water; dries in minutes |
| Safe for sleep? | No. Remove before every nap and bedtime | No. Never use in a cot, pram nap or car seat | No. Keep cots clear of all toys and teethers |
How to choose and use them by age stage
A baby's hands, mouth and teeth change fast in the first year. What works at four months can become risky by nine months.
0 to 3 months
Most newborns do not need teething gear yet. They chew on bare fists to explore and settle themselves. Health groups prefer bare hands during awake time so babies can feel different textures and move their fingers freely.
If your newborn scratches their face, trim or file their nails softly while they sleep. Do not put teething mittens on a newborn for sleep.
3 to 6 months
Drooling often picks up around three or four months. Babies bring their hands to their mouth all day, even before a tooth breaks through. A teething mitten can help here because many babies at this age still drop hand-held toys right away.
Pick a mitten with a breathable cotton body, a secure wrist strap and a one-piece silicone tip stitched firmly in place. Watch your baby while the mitten is on. Take it off as soon as your baby looks sleepy.
6 to 12 months
First front teeth usually appear around six months. By now, most babies can pick up and hold a one-piece silicone teether on their own. You may not need a teething mitten at all once your baby grips toys well.
If you use a beaded clip for a dummy while out and about, check it often. Babies at this stage love to pull, twist and chew on the beads instead of the dummy. Make sure the clip stays short and fastened to the front of your baby's shirt, never near the neck.
12 months and up
Back molars start moving around 12 to 18 months. Toddlers have much stronger jaws and sharp teeth. They can bite clean through soft silicone beads or fray a cord in seconds.
At this stage, swap beaded clips for sturdy one-piece teethers or a clean, damp washcloth chilled in the fridge. Keep an eye on older siblings too, as toddlers sometimes share toys with younger babies.
Step-by-step safety check and daily cleaning
Even a brand-new product can wear out fast once a baby chews on it every day. Build these quick checks into your routine.
The five-second check before every use
- Pull the ends: Hold the clip in one hand and the loop in the other. Give a firm tug. Nothing should stretch, slip or rattle.
- Check every bead: Look closely at each silicone or wood bead. Check for tooth marks, splits, fading or rough spots.
- Check the knots and cord: Make sure the cord is not frayed, fuzzy or thinning where it rubs against the beads.
- Test the clip clasp: Open and close the clip. Check that the teeth or spring are tight and rust-free.
- Inspect mittens inside out: Turn a teething mitten inside out after washing. Trim or bin it if you see loose threads or unravelling seams.
How to clip a dummy holder safely
- Fasten the clip to the chest area of your baby's shirt or bib.
- Never clip it to a collar, hood or scarf near the throat.
- Never clip it to car seat straps, pram harnesses or cot bars.
- Keep the whole clip short enough that it cannot reach around your baby's neck.
- Never tie extra toys onto the same clip.
How to wash and dry them
Drool, milk and floor dust build up quickly on teething gear. Wash mittens and clips every day, or straight after they hit the ground.
For silicone beaded clips, wash them by hand in warm water with mild dish soap. Rinse well with clean water. Do not boil or steam-sterilise a beaded clip unless the maker clearly says it is safe. High heat can weaken nylon cords, warp plastic clasps and rust metal springs.
Press the cord dry with a clean towel and hang the clip in a breezy spot. Make sure the knots inside the beads dry all the way through so mould cannot grow.
For teething mittens, check the care tag. Most fabric mittens can go in a gentle machine wash inside a mesh laundry bag. Skip fabric softeners and scented boosters, as babies chew right on the cloth. Air dry the mitten completely before putting it back on your baby's hand.
Common mistakes parents make
Most teething gear accidents happen from simple everyday habits, not neglect. Watch out for these common traps.
- Leaving mittens or clips on for sleep: Even a five-minute car nap or pram snooze needs a clear face and clear neck. Take mittens and clips off as soon as your baby gets drowsy.
- Clipping a dummy to the car seat harness: In a crash, or even during normal wriggling, anything clipped to a harness strap can pull tight or get in the way of the buckle.
- Making a clip longer: Joining two clips together or tying on a ribbon turns a short strap into a strangulation hazard.
- Buying handmade clips without safety checks: Cute custom name clips on social media often use tiny letter beads or weak knots. Letter cubes can crack or come loose easily.
- Keeping damaged gear too long: Once a baby bites a nick into silicone, that tear spreads fast. Replace worn items straight away.
- Freezing gel teethers rock-hard: Frozen hard teethers can bruise sore gums and make plastic brittle. Chill teethers in the fridge instead, never the freezer, unless the maker says it is safe.
- Using teething gels without advice: Speak to a doctor, midwife or pharmacist before using teething gels or pain medicine. Some numbing gels are not safe for young babies.
Safer ways to soothe sore gums
You do not need fancy gadgets to help a teething baby. Simple, low-risk options often work just as well.
- Clean finger massage: Wash your hands well and gently rub your baby's gums with a clean finger.
- Chilled damp washcloth: Wet one corner of a clean cotton face washer, chill it in the fridge for 20 minutes, and hold it while your baby chews.
- One-piece silicone teether: Choose a single solid shape with no joints, no liquid filling and no cords. Make sure it is too wide to fit all the way into your baby's mouth.
- Cool foods for older babies: Once your baby is safely eating solids (around six months), chilled soft fruit in a supervised way or cool water in an open cup can calm sore gums.
Frequently asked questions
Can my baby sleep in a teething mitten or with a beaded clip?
No. Take off all teething mittens and dummy clips before naps and overnight sleep. Safety groups in Australia, the UK, the US and Canada say babies should sleep on their backs with nothing around their neck or near their face. A plain dummy with no clip is fine for sleep if your baby uses one.
Are handmade silicone beaded clips safe?
Many handmade clips are not tested to toy or dummy-holder safety rules. Some use weak knots, tiny spacer beads or letter cubes that can snap off when chewed. If you buy a beaded clip, pick a trusted brand that prints its business name, safety standard and care instructions on the packaging.
What does BPA-free and phthalate-free actually mean?
BPA and phthalates are chemicals used to make some plastics hard or bendy. BPA-free and phthalate-free means the maker did not add those chemicals to the silicone or plastic. Always look for 100% food-grade silicone from a named brand rather than unbranded online listings.
How long should a dummy or teether clip be?
A dummy clip must be short enough that it can never wrap around a baby's neck. UK and European rules cap the strap length at roughly the width of an adult hand (about 22 centimetres), not counting the clip itself. If a clip looks long enough to reach your baby's ear or loop around their neck, do not use it.
How do I clean a teething mitten without growing mould?
Wash teething mittens every day in warm soapy water or a gentle machine cycle with mild, unscented detergent. Rinse well so no soap stays in the fabric. Squeeze out extra water with a clean towel and air dry the mitten all the way through before your baby wears it again.
What should I do if a bead comes loose or my baby chokes?
Take the clip away at once and check your baby's mouth carefully without pushing anything deeper. If your baby is coughing strongly, let them keep coughing and watch closely. If your baby cannot breathe, cough or cry, call emergency services right away (000 in Australia, 999 in the UK, 911 in the US and Canada) and start infant choking first aid. Learning baby choking first aid from the NHS, Red Cross or local health service is a smart step for every parent.
Sources
- Product Safety Australia – Recalls
- Food Standards Australia New Zealand – Bisphenol A (BPA)
- UK Office for Product Safety and Standards
- NHS (UK) – How to stop a child from choking
- U.S. CPSC – Phthalates business guidance
- American Academy of Pediatrics (US) – Choking prevention
- Health Canada – Recalls and safety alerts
- The Lullaby Trust (UK) – Keeping a clear cot
Pramod Rimal
Founder & editor
Practical, evidence-led guides for Australian families. We check claims against Australian standards and official health and safety guidance, and link our sources so you can check them too.
Visit Pramod Rimal’s website →About us and how we research →
Related guides
More Feeding & Baby Food →
Hardwood vs Pine Timber Cots: Slat Gaps, Teething Rails and Cot Safety Standards
2 Nov 2026 · 19 min readTeething Bandana Bibs with Silicone Corners: What to Know Before Use
11 Oct 2026 · 12 min readGlass vs. PPSU vs. Silicone Baby Bottles: Heat, Safety and Teat Venting
3 Nov 2026 · 16 min read













